Hi,
I downloaded the firmware and upgrade soft from this page:
https://drive.google.com/drive/folders/1MI5XiLReotmvD9N0kJKL_q--yb3REeFH
However, during upgrade, I received several errors:
2022-07-20 16:12:38 Application Startup...
2022-07-20 16:12:51 DEVICE1:206 (2M) (2M) CLEAR_VDFS_FAILED("None" in fwsp.BaseFirmwareOP.ERASE_FLASH(fwsp.py, line 685))
2022-07-20 16:12:52 Device 1:206 failed: (2M) CLEAR_VDFS_FAILED, took 1 seconds (35%)
2022-07-20 16:13:39 DEVICE1:206 (2M) (2M) CLEAR_VDFS_FAILED("None" in fwsp.BaseFirmwareOP.ERASE_FLASH(fwsp.py, line 685))
2022-07-20 16:13:39 Device 1:206 failed: (2M) CLEAR_VDFS_FAILED, took 1 seconds (35%)
2022-07-20 16:14:13 DEVICE1:206 (2M) CLEAR_BOOT_FAILED
2022-07-20 16:14:13 Device 1:206 failed: (2M) CLEAR_BOOT_FAILED, took 1 seconds (35%)
Now, it will not even turn on. It is always found by the firmware upgrade tool, but the firmware never once was successful in completion. The reboot and reset is not doing anything to help revert the situation.
Can you at least provide me with original firmware that the speaker was sent with, so I can try reverting to it? If not, are there any other ways? The instruction is only written with succesful ugprade in mind, no instructions for the failure.
Best regards,
x.
